SPACEMASTER™ COMPACT FEED LINES
COE Press Equipment's SpaceMaster™ compact coil lines are designed for progressive die applications, eliminating the need for a looping pit and saving valuable floor space. The patent-pending Series 4 and 5 models are especially capable of processing high-strength, high-yield materials in a small footprint. These systems combine unwinding, straightening, and feeding into a single machine, offering true piloting and handling a wide range of materials with thicknesses up to .725 inches and weights up to 60,000 pounds.
Equipment Capabilities
- Coil width: 1" - 72"
- Thickness: .010" - .725"
- Coil weight: up to 60,000#
- Speeds: 70 FPM - 250 FPM
- Footprint: typically 10’ – 34’ in length
- Yield Strength: 10 – 300 KSI
- Materials: AHSS, CR Steel, HR Steel, Galvanized, Stainless, Pre-painted, Aluminum
- Bottom Payoff = No Looping Pit
- True Piloting
- Great for Progressive Die Applications
Features and options may vary. Contact COE for application-specific limits and details.
Discover the innovative capabilities of COE Press Equipment's SpaceMaster® Series 4 compact coil line.
SPACEMASTER SERIES 2
SpaceMaster® Series 2 compact coil lines combine unwinding, straightening, and feeding into a single machine to maximize coil feeding efficiency with pilot release while saving floor space.
Material Width: 12" – 52"
Material Thickness: .010" – .187"
Coil Weight: 6,600 – 11,000 lbs
Speed: Up to 60 FPM
Line Length: 13 ft
Materials: CRS, HRS, stainless, aluminum
Standard Features
- Motorized coil reel with inverter-duty AC variable speed drive
- Hydraulic mandrel expansion & fail-safe disk brake for clockspring control
- Air-operated hold-down arm and coil hold-up for threading
- Motorized variable-speed endwheel for threading; threading assist roll
- Electric-eye loop control; anti-backup in debender
- Dual-roll entrance / single-roll exit edge guides (±1" offset)
- 3-roll catenary support; ±4" passline height via screw jacks
- 9 power-driven straightener rolls; precision spur gear drivetrain
- Worm-gear adjustment of upper rolls
- Full-width #3 matte chrome-coated feed rolls
- Servo-driven feeder-straightener
Available Options
- 460V step-down transformer; 72" max coil O.D.
- Extra set of 4 coil keepers; hydraulic traveling coil car
- 80 FPM max line speed; special expansion 19.5"–24.5"
- Motorized passline, straightener roll, and coil guide adjustments
- Coil weight upgrades to 11,000 or 15,000 lbs; dual-roll upper coil guide
- Increased feed drive size/reduction
SPACEMASTER SERIES 3
SpaceMaster® Series 3 compact coil lines integrate unwinding, straightening, and feeding on a common base for stability and floorspace savings.
Material Width: 16" – 64"
Material Thickness: .010" – .187"
Coil Weight: 11,000 – 20,000 lbs
Speed: Up to 60 FPM
Line Length: 15-1/3 ft
Materials: CRS, HRS, stainless, aluminum
Standard Features
- Motorized coil reel; inverter-duty AC variable-speed drive
- Hydraulic mandrel expansion & fail-safe disk brake
- Hydraulic hold-down arm and coil hold-up for threading
- Motorized endwheel; threading assist and debender roll assemblies
- Electric-eye loop control; motorized dual-roll upper coil guides
- Dual-roll entrance / single-roll exit edge guides (±1")
- 3-roll catenary; motorized ±4" passline & coil guide adjustment
- 8 straightener rolls (4 over 4); power-driven lower rolls
- Precision spur gear drivetrain; worm-gear upper roll adjustment
- Full-width #3 matte chrome feed rolls; servo-driven feeder-straightener
Available Options
- 460V step-down transformer; 72" max coil O.D.
- Hydraulic traveling coil car; 80 FPM max line speed
- Special expansion 19.5"–24.5"
- Motorized straightener roll adjustment
- Coil weight upgrades to 15,000, 20,000, or 30,000 lbs
- Increased feed drive size/reduction
SPACEMASTER SERIES 4
Patent-pending SpaceMaster® Series 4 compact lines process heavy-gauge, high-strength materials in space-constrained areas, fitting within ~23 ft of floorspace while delivering high SPM rates.
Material Width: 12" – 72"
Material Thickness: .030" – .300"
Coil Weight: 10,000 – 60,000 lbs
Yield Strength: Up to 1000 MPa
Feeding Speed: Up to 60–70 SPM
Materials: CRS, HRS, AHSS, stainless, aluminum
Features & Benefits
- Servo-driven feeder-straightener with 4.0" straightening rolls
- 6.3" diameter pinch & feed rolls; bank-type upper roll adjustment
- Servo-actuated pilot release with eccentric lift for high-speed roll lift
- Powered pull-off pinch rolls maintain tension and aid threading
- Horizontal loop cage with laser trim sensor for speed averaging
- Hold-down with motorized endwheel (hydraulic clockspring containment)
- Tapered, powered coil guides with independent hydraulic actuation
- Pivoting peeler–debender for hands-free threading
SPACEMASTER SERIES 5
Patent-pending SpaceMaster® Series 5 compact lines handle aluminum through AHSS within ~28 ft of floorspace, combining unwinding, straightening, and feeding and delivering quick ROI.
Material Width: 24" – 72"
Material Thickness: .040" – .620"* (*depends on width/material)
Coil Weight: 10,000 – 60,000 lbs
Yield Strength: Up to 1000 MPa
Feeding Speed: Up to 50–60 SPM
Materials: CRS, HRS, AHSS, stainless, aluminum
Features & Benefits
- Servo-driven feeder-straightener with 5.0" straightening rolls
- 6.7" diameter pinch & feed rolls; bank-type upper roll adjustment
- High-speed servo-actuated pilot release (eccentric lift)
- Powered pull-off pinch rolls with AC variable-speed drive
- Horizontal loop cage with laser trim sensor
- Hold-down with motorized endwheel; hydraulic clockspring containment
- Tapered, powered coil guides with independent hydraulics
- Pivoting peeler–debender for hands-free threading
*Thickness capacity depends on width and material; consult factory for application evaluation.
MORE COE SOLUTIONS
5-4-3 WARRANTY
Our standard modular designs reduce components and simplify maintenance—delivering greater reliability and uptime. That’s why every new COE coil feed system comes with our 5-4-3 Warranty on materials and workmanship, plus 24/7 technical support to minimize downtime and protect your investment.
5 YEAR
Limited coverage on components manufactured by COE.
4 YEAR
Limited coverage on mechanical components installed by COE.
3 YEAR
Coverage on the complete system.
A top tier appliance OEM touring COE Press Equipment's Assembly Shop in Sterling Heights, MI
WHY MANUFACTURERS CHOOSE COE
- Proven Performance: Since 1976, we’ve delivered durable, innovative coil lines that last decade after decade.
- Engineering-Backed Solutions: Every system is sized and spec’d using COE-developed tools to ensure it performs exactly as needed—no guesswork.
- Built In-House: Our vertically integrated process gives us full control over quality, customization, and delivery.
- Customer-First Commitment: We listen, respond, and support—before, during, and long after installation.